SlipDoctors Non Slip Resistant Spray for Fiberglass, White

SlipDoctors Non Slip Resistant Spray for Fiberglass, White
SlipDoctors 856669002158 - Can be used on fiberglass, metal, concrete, VCT, fiberglass, tiles, porcelain and many other surfaces. Increased surface traction creates a safer walking surface that will reduce the likelihood of a slip-and-fall accident. Permanent: yes, but can be removed by sanding. Dry to touch: dries quickly in 10 to 20 minutes.

Dry to handle: can be handled or recoated in approximately 1 hour. Dries in 20 minutes or less. Excellent gas and oil resistant. Dries hard: allow 24 hours at 77 degrees F/25 degrees C before subjecting to heavy foot traffic. Clean up: clean valve immediately after each use by holding can upside down and spraying until clear gas comes out 3-5 seconds.

SlipDoctors Non Slip Resistant Spray for Fiberglass, White - Great alternative to bath mats. Long Lasting. If spray valve becomes clogged, pull off and clean in lacquer thinner. Lead free: pigments contain no lead. Maximum durability and strong adhesion. Ideal for coating smaller or irregularly shaped surfaces and designed for interior and exterior use. Eliminates need for bathmats.

Voc percent: meets voC standards; 80 percent - slip resistant coating.

More information about SlipDoctors 856669002158

SlipDoctors Non Slip Resistant Spray for Fiberglass, Clear

SlipDoctors 856669002110 - Ideal for coating smaller or irregularly shaped surfaces and designed for interior and exterior use. Ease of application: convenient aerosol spray can. Slip resistant; easy to clean. It is ideal for any surface that is slick when wet. If spray valve becomes clogged, pull off and clean in lacquer thinner. Works on porcelain and fiberglass bathtubs.

Cfcs chlorofluorocarbon: contains no CFCs or other substances which deplete the ozone layer. Dries in 20 minutes or less. Slip resistant; easy to clean. Great alternative to bath mats. Long Lasting. Dries in 20 minutes or less. Dry to touch: dries quickly in 10 to 20 minutes. Dries hard: allow 24 hours at 77 degrees F/25 degrees C before subjecting to heavy foot traffic.

SlipDoctors Non Slip Resistant Spray for Fiberglass, Clear - Permanent: yes, but can be removed by sanding. Maximum durability and strong adhesion. Application temperature: 50 to 90 degrees F/ 10 to 32 degrees C. Friendly to bare feet, gas and oil resistant, chemical, lead-free, for use indoors or outdoors.

More information about SlipDoctors 856669002110


Similar products:


Non Slip Spray for Bathtubs and Shower

SlipDoctors S-SPY-FIBCLR - One can covers up to 20 square feet. Works on porcelain and fiberglass bathtubs. Maximum durability and strong adhesion. Slip resistant; easy to clean. This easy to apply aerosol spray will create a clear non-skid surface will work on virtually any surface. After one spray, you will have a long lasting non slip solution.

Adheres to almost all surface types. Great alternative to bath mats. Works on Fiberglass or Porcelain Bathtubs. Great Alternative to Bathmats. Dries in 20 minutes or less. You no longer have to worry about slipping and slipping in the bathtub, boats, shower, etc. Easy to Apply.

More information about SlipDoctors S-SPY-FIBCLR


Similar products: