Pentek RFC20-BB Carbon Filter Cartridge, 20" x 4-1/2"

Pentek RFC20-BB Carbon Filter Cartridge, 20" x 4-1/2"
Pentair Industries RFC20-BB - The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. Porous polyethylene 70-micron outer shell reduces carbon fines and other particles. Granular activated carbon GAC media with spun polypropylene core and polypropylene end caps for strength.

This pentek rfc20-bb carbon filter cartridge reduces chlorine taste and odor in residential and commercial drinking water. Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization.

Pentek RFC20-BB Carbon Filter Cartridge, 20" x 4-1/2" - The filter has an initial pressure drop of 090 pounds per square inch psi at a recommended flow rate of 4 gpm, and operates over a temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. It is made of granular activated carbon gAC media with a spun polypropylene core and polypropylene end caps for strength, and there is a nitrile butadiene rubber Buna-N gasket to ensure a watertight seal.

This carbon filter cartridge is used for treatment of residential and commercial drinking water.

More information about Pentair Industries RFC20-BB

Pentek DGD-2501-20 Spun Polypropylene Filter Cartridge, 20" x 4-1/2"

Pentek DGD-2501-20 - The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. This pentek dgd-2501-20 spun polypropylene filter cartridge reduces sand, silt, commercial, scale, and rust particles in residential, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges.

This spun polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, commercial, and is used for treatment of residential, and municipal drinking water. Specificationsnominal filtration rating pre-filter25 micronsNominal filtration rating post-filter1 micronInitial pressure drop at 20 gpm.

Pentek DGD-2501-20 Spun Polypropylene Filter Cartridge, 20" x 4-1/2" - The nominal filtration rating of the pre-filter layer is 25 microns, and the rating of the post-filter layer is 1 micron. It has an initial pressure drop of less than 1 pound per square inch psi at a flow rate of 20 gallons per minute gpm, and operates over a temperature range of 40 to 145 degrees F 4. 4 to 62.

8 degrees C.

More information about Pentek DGD-2501-20


Similar products:


Pentek SW-4 Plastic Filter Wrench used on Big Blue Filter Systems

Pentek SH144368 - Initial pressure drop of less than 1 psi at a flow rate of 20 gpm. The pentek sw-4 filter wrench is a durable and simple filter housing removal tool that will make changing filters easier. Great for the DIY'er or Contractors. Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Wrench constructed with durable plastic.

Used on the Pentek Big Blue filter systems. Reduces sand, scale, and rust particles in residential, silt, commercial, and municipal drinking water. Combines two separate gradient layers for higher efficiency and dirt-loading capacity. Works with: Pentek Big Blue and others. Spun polypropylene for resistance to chemicals and bacteria.

Pentek SW-4 Plastic Filter Wrench used on Big Blue Filter Systems - Easily removes filter housings for quickly changing filters.

More information about Pentek SH144368


Similar products:


Pentek 151122 OR-100 Buna-N O-ring for Big Blue Housings

Pentair Industries TIER1-OR-100 - Reduces sand, scale, and rust particles in residential, silt, commercial, and municipal drinking water. Combines two separate gradient layers for higher efficiency and dirt-loading capacity. Works with: Pentek Big Blue and others. Easily removes filter housings for quickly changing filters. Water filters are used in a wide range of applications, swimming pools, industrial processes, including drinking water purification, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization.

Pentek 151122 OR-100 Buna-N O-ring for Big Blue Housings - Initial pressure drop of less than 1 psi at a flow rate of 20 gpm. Material: Buna-N. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the maximum flow rate, the downstream concentration of unwanted chemicals, and the amount of water that can be filtered before the filter must be replaced.

For use with: pentek, pentair Water - Big Blue Housings Only. This pentek 151122 or-100 o-ring is used to seal water filter housings. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance.

This o-ring fits pentek big blue filter housings, such as drinking water purification, which are used in various applications, swimming pools, and industrial processes, among others.

More information about Pentair Industries TIER1-OR-100


Similar products:


Pentek 150467 20-BB 3/4" Big Blue Filter Housing with Pressure Relief

Pentair Industries 3/4" #20 BB Black/Blue HFPP w/PR - Package Quantity: 1 Piece. It has an initial pressure drop of 2 pounds per square inch psi at a flow rate of 15 gallons per minute gpm, a maximum operating pressure of 90 psi, and a maximum operating temperature of 100 degrees F 37. 8 degrees C. The cap has 1" female national pipe thread Taper NPT threaded input and output connections and a nitrile butadiene rubber Buna-N O-ring to ensure a watertight seal.

For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Pressure relief button for easier cartridge replacement. Easily removes filter housings for quickly changing filters. Type: O-Ring. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges.

Pentek 150467 20-BB 3/4" Big Blue Filter Housing with Pressure Relief - Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Wrench constructed with durable plastic. Reduces sand, and rust particles in residential, scale, silt, commercial, and municipal drinking water. Combines two separate gradient layers for higher efficiency and dirt-loading capacity.

More information about Pentair Industries 3/4" #20 BB Black/Blue HFPP w/PR


Similar products:


Pentek DGD-5005-20 5 Micron 20 x 4.5 Comparable Whole House Sediment Water Fi.

Tier1 COMINHKR062095 - Pressure relief button for easier cartridge replacement. Great for the DIY'er or Contractors. Works with: Pentek Big Blue and others. Replace your old pentek dgd-5005-20 or liquatec sDF-45-2005 with a Tier1 SDF-45-2005. Type: O-Ring. Use with a 20" x 4-1/2" filter cartridge sold separately. Quick & easy installation: quick and easy installation into your 20 x 4.

5 inch big Blue whole house filtration system. 6 month filter life: by replacing your water filter every 6 months, depending on the quality of your water, you keep your water tasting great with the Tier1 SDC-45-2005. Initial pressure drop of less than 1 psi at a flow rate of 20 gpm. Get the high quality sediment filters you deserve by ordering P5-20BB Tier1 sediment water filters from us today.

Pentek DGD-5005-20 5 Micron 20 x 4.5 Comparable Whole House Sediment Water Fi. - High quality filtration: this tier1 155358-43 spun-polypropylene sediment filter reduces sediment, sand, dirt, particulates, and silt. Replacement part for many part numbers & models: this filter is comparable to many 5 Micron 20 x 4. 5 sediment filter. Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C.

More information about Tier1 COMINHKR062095


Similar products:


Pentek EP-20BB Carbon Block Filter Cartridge, 20" x 4-5/8", 5 Microns

Pentair Industries EP-20BB - For use with: pentek, pentair Water - Big Blue Housings Only. The cartridge has an initial pressure drop of 5. 5 pounds per square inch psi at a flow rate of 5 gallons per minute gpm, and operates over a temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Type: O-Ring. 100% tier1 no worries guarantee: We stand behind the quality of filtration and overall performance of our Tier1 filters!

The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. Replace your old pentek dgd-5005-20 or liquatec sDF-45-2005 with a Tier1 SDF-45-2005. 6 month filter life: by replacing your water filter every 6 months, depending on the quality of your water, you keep your water tasting great with the Tier1 SDC-45-2005.

Pentek EP-20BB Carbon Block Filter Cartridge, 20" x 4-5/8", 5 Microns - Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. Initial pressure drop of 2 psi at a flow rate of 15 gpm. Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. Quick & easy installation: quick and easy installation into your 20 x 4.

5 inch big Blue whole house filtration system. For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

More information about Pentair Industries EP-20BB


Similar products:


Pentek 155356-43 20" 75/25 Micron Dual Gradiant Poly Cart.

Pentek 155356-43 - Pentek dgd-7525-20 water filter housings: for use in ametek, us filter, ametek, culligan 20" Big Blue housings The following Culligan, USFilter and Plymouth Products model holds the DGD-7525-20 sediment water filter cartridge: #20 Big Blue. Nominal filtration rating of 5 microns. 100% tier1 no worries guarantee: We stand behind the quality of filtration and overall performance of our Tier1 filters!

The pentek dgd-7525-20 sediment water filter cartridge also fits cuno aquapure, honeywell, Master Plumber, Teledyne Water Pik, General Electric, Sears, Flotec, Ace, Fulflo, Omni, American Plumber and most other water filter housings for 20" x 4.5" filters. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life.

Pentek 155356-43 20" 75/25 Micron Dual Gradiant Poly Cart. - 75 micron pre-filter fine sediment water filter layer and a 25 micron post-filter extra-fine sediment water filter layer. Pentek dgd-7525-20 water filter replacement information: The Pentek DGD-7525-20 filters are easy to install in whole house systems or commercial water filter systems. The filter change interval also depends on your water supply and water usage.

Use with a 20" x 4-1/2" filter cartridge sold separately. Temperature range of 40 to 180 degrees F 4. 4 to 82.

More information about Pentek 155356-43


Similar products:


Tier1 Replacement for Pentek RFC-20BB 25 Micron 20 x 4.5 Radial Flow Granular Activated Carbon Block Water Filter

Tier1 - This filter will last you up to 6 months, 000 gallons which equates to 4 gallons per minute, or every 100, whichever comes first. Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Wrench constructed with durable plastic. 75 micron pre-filter fine sediment water filter layer and a 25 micron post-filter extra-fine sediment water filter layer.

Package Quantity: 1 Piece. Easily removes filter housings for quickly changing filters. Two separate gradient density layers that enhance cartridge performance. Pressure relief button for easier cartridge replacement. Great for the DIY'er or Contractors. Initial pressure drop of 2 psi at a flow rate of 15 gpm. High quality filtration: granular Activated Carbon GAC provides multple layers of filtration to improve the odor and taste of your water.

Tier1 Replacement for Pentek RFC-20BB 25 Micron 20 x 4.5 Radial Flow Granular Activated Carbon Block Water Filter - Filter depth is increased to a full 233% of standard spun-polypropylene or string-wound filters. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. High quality filtration: this tier1 155358-43 spun-polypropylene sediment filter reduces sediment, sand, particulates, dirt, and silt.

Replacement part for many part numbers & models: this filter is comparable to many 5 Micron 20 x 4.

More information about Tier1


Similar products:


Pentek 155263, RFFE20-BB Compatible Iron Reduction Cartridge by CFS

CFS - Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. Package Quantity: 1 Piece. For use with: pentek, pentair Water - Big Blue Housings Only. By filtering chlorine, You'll enjoy cleaner, spring-like water from every tap in the house. Quick & easy installation: quick and easy installation into your 20 x 4.

5 inch big Blue whole house filtration system. Filters chloramine and other chemical contaminants. Enjoy softer skin and hair, free of the drying effects of chemicals. Initial pressure drop of less than 1 psi at a flow rate of 20 gpm. High quality filtration: granular Activated Carbon GAC provides multple layers of filtration to improve the odor and taste of your water.

Pentek 155263, RFFE20-BB Compatible Iron Reduction Cartridge by CFS - Pressure relief button for easier cartridge replacement. Use with a 20" x 4-1/2" filter cartridge sold separately. 6 month filter life: by replacing your water filter every 6 months, depending on the quality of your water, you keep your water tasting great with the Tier1 SDC-45-2005. Initial pressure drop of 2 psi at a flow rate of 15 gpm.

Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. Large filter housing for high-flow and heavy sediment applications. Initial pressure drop of 5.

More information about CFS


Similar products:


Tier1 Replacement for Hydronix DGD-5005-20 SDC-45-2005 5 Micron 20 x 4.5 Spun Wound Polypropylene Water Filter 4 Pack

- Package Quantity: 1 Piece. Material: Buna-N. Thedgd-5005-20 pentek whole house filter replacement cartridge by tier1 4-pack is an affordably priced option that ensures you serve only high quality water from every faucet throughout your home! Built to capture and filter virtually all types of sediment particles, 5 micron or larger, out of the water in your home.

Nominal filtration rating of 5 microns. Easily removes filter housings for quickly changing filters. 6 month filter life: by replacing your water filter every 6 months, depending on the quality of your water, you keep your water tasting great with the Tier1 SDC-45-2005. Pentek 155263, rffe20-bb compatible Iron Reduction Cartridge by CFS.

Tier1 Replacement for Hydronix DGD-5005-20 SDC-45-2005 5 Micron 20 x 4.5 Spun Wound Polypropylene Water Filter 4 Pack - Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Wrench constructed with durable plastic. Filter depth is increased to a full 233% of standard spun-polypropylene or string-wound filters. Get the high quality sediment filters you deserve by ordering the DGD-5005-20 Pentek Whole House Filter Replacement Cartridge by Tier1 4-Pack from us today.

Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. High quality filtration: this tier1 155358-43 spun-polypropylene sediment filter reduces sediment, dirt, sand, particulates, and silt.

More information about


Similar products: