GRIDMANN NSF Stainless Steel 18" Single Bowl Commercial Kitchen Sink with Left Drainboard - 12 in. Deep

GRIDMANN NSF Stainless Steel 18" Single Bowl Commercial Kitchen Sink with Left Drainboard - 12 in. Deep
#ad
GRIDMANN #ad - Includes:sink basin with attached drainboard, four legs, 24" front to back, basket strainer drain trap not included dimensions:overall dimensions: 39" left to right, 44" to 45" backsplash height depending on feet adjustment Bowl Size: 18" x 18" x 12" deep Backsplash Height from Top of Sink Bowl: 10" From Floor to Top of Sink Rim: 37" to 38" depending on feet adjustment Drainboard: 16-1/4" Wide Faucet Mounting Holes: 8" on-center drilled to 1-1/4" diameter to fit standard faucets Drain Connections: Made to fit a standard 1-1/2" tailpiece/trap Top grade stainless: all working surfaces are crafted from commercial-grade 18-gauge 304 stainless steel also known as 18/8.

Nsf certified to meet the strict standards for public health protection. Minor assembly required attaching of legs. The 10" tall backsplash has been pre-drilled to accept an 8" spread wall-mount faucet faucet not included. Attached, left-hand side drainboard, designed with an incline allowing water to drain directly into the sink's basin.

GRIDMANN NSF Stainless Steel 18" Single Bowl Commercial Kitchen Sink with Left Drainboard - 12 in. Deep #ad - Therefore, surface imperfections such as scratches, scuffs, and indents may be found. The 1" wide drip channel surrounding the basin interior ensures proper drainage, eliminating stand water. A large 18" x 18" bowl, with stainless steel basket strainer, provides plenty of room for washing. Designed for superior working comfort, Gridmann's stainless steel utility sink is finished with rounded edges and corners.

More information about GRIDMANN #ad

Peerless 2-Handle Wall Mount Kitchen Sink Faucet, Chrome P299305LF

#ad
Delta Faucet P299305LF #ad - Easy installation: designed to fit 2-hole, wall-mounted configurations with 7-9 inches between hole centers. 2-handle design: the two-handle design provides total control in finding the perfect water temperature. The only problem will be deciding on a favorite. Looking for just the right faucet to place on your kitchen sink? You're at the right place.

. With the full line of peerlessR kitchen faucets, it's easy to find just the right touch for your kitchen. Lifetime limited warranty: you can install with confidence, knowing Peerless kitchen faucets are backed by the Peerless Lifetime Limited Warranty. Purchase supply lines separately: Standard supply lines are required for installation and must be purchased separately to complete the unit.

Peerless 2-Handle Wall Mount Kitchen Sink Faucet, Chrome P299305LF #ad - Complete flexibility: the high arc, wall-mount design swivels 360 degrees for added convenience during everyday kitchen tasks. Traditional, contemporary or transitional. No matter what your preference, you'll find just the style you're looking for here.

More information about Delta Faucet P299305LF #ad


Similar products:


T&S Brass B-0230-K Installation Kit for B-0230 Style Faucets. Two short elbows, nipples, lock nuts and washers that provide 1/2" NPT male inlet and outlet when assembled

#ad
TS Brass B-0230-K #ad - Purchase supply lines separately: Standard supply lines are required for installation and must be purchased separately to complete the unit. Two short elbows with 1/2" NPT male inlet and 1/2" NPT female outlet. Material: Brass. B-0230 series Faucet Installation Kit. 2-handle design: the two-handle design provides total control in finding the perfect water temperature.

Complete flexibility: the high arc, wall-mount design swivels 360 degrees for added convenience during everyday kitchen tasks. T & s brass b-0230 installation kitthis t & s Brass installation kit is for the wall mount double pantry faucet model B-0230 Easy installation: designed to fit 2-hole, wall-mounted configurations with 7-9 inches between hole centers.

T&S Brass B-0230-K Installation Kit for B-0230 Style Faucets. Two short elbows, nipples, lock nuts and washers that provide 1/2" NPT male inlet and outlet when assembled #ad - Two 1/2" npt supply nipples with lock nuts and washers. This kit includes two of each: 1/2" supply nipples, lock nuts, lock washers and male and female short elbows. Model #: b-0230-k installation kit for model b-0230 ul registered 103009 Lifetime limited warranty: you can install with confidence, knowing Peerless kitchen faucets are backed by the Peerless Lifetime Limited Warranty.

More information about TS Brass B-0230-K #ad


Similar products:


IMLEZON Commercial Wall Mount Kitchen Sink Faucet Brass Constructed Polished Chrome Pre-Rinse Device 25" Height 8" Center with Coilded Spring Pull Down Sprayer and 12" Add-on Spout

#ad
IMLEZON IMLEZON2TH-002 #ad - Material: Brass. 2-handle design: the two-handle design provides total control in finding the perfect water temperature. Two 1/2" npt supply nipples with lock nuts and washers. B-0230 series Faucet Installation Kit. It make the appearance more aesthetically, and It has high hardness and better heat resistance characteristics.

Easy to install the faucet by hand, and there is no water leakage. The flexible metal tubing can be bend back and forth over 100000 cycles. Easy installation: designed to fit 2-hole, wall-mounted configurations with 7-9 inches between hole centers. Purchase supply lines separately: Standard supply lines are required for installation and must be purchased separately to complete the unit.

IMLEZON Commercial Wall Mount Kitchen Sink Faucet Brass Constructed Polished Chrome Pre-Rinse Device 25" Height 8" Center with Coilded Spring Pull Down Sprayer and 12" Add-on Spout #ad - Lead-free brass construction with superior rust-resistant finish. Double-layer anti-leaking constructionwith two O-rings, it can provide enhanced leak-tightness of the faucet while increasing the service life one times. The outlet pipe can rotate at 360 degrees. Two short elbows with 1/2" NPT male inlet and 1/2" NPT female outlet.

Complete flexibility: the high arc, wall-mount design swivels 360 degrees for added convenience during everyday kitchen tasks. We add a stainless steel sheath on the interface between the tubing and faucet to increase the service life of the tubing. The surface of faucet is plated by chrome treatment.

More information about IMLEZON IMLEZON2TH-002 #ad


Similar products:


Installation kit for Wall Mount Commercial Faucet,backsplash Mount Set for Stainless Steel Commercial Kitchen Prep & Utility Sink

#ad
The Chi's #ad - The surface of faucet is plated by chrome treatment. 1/2 ips straight therad】it is not 1/2 npt, it's 1/2 ips which is also called G1/2, fitting wall commerical faucets with G1/2 female end. We add a stainless steel sheath on the interface between the tubing and faucet to increase the service life of the tubing.

Installation kit for backslash mount】this elbow adapter with 1/2 ips male ends is designed to install a wall mount commerical faucet on the backsplash of Stainless Steel Commercial Kitchen Prep & Utility Sink. Material: Brass. Lead-free brass construction with superior rust-resistant finish. Double-layer anti-leaking constructionwith two O-rings, it can provide enhanced leak-tightness of the faucet while increasing the service life one times.

Installation kit for Wall Mount Commercial Faucet,backsplash Mount Set for Stainless Steel Commercial Kitchen Prep & Utility Sink #ad - The outlet pipe can rotate at 360 degrees. Easy to instal】connect the longer end to the back of wall mount faucet, the shorter end to water line, aganist washes at the back of Stainless Steel sink by lock nuts to secure faucet. Sold in pair】comes with 90 degree angled elbow joint x 2, lock nut x 2, plastic washer x 2 and rubber washer x 2.

2-handle design: the two-handle design provides total control in finding the perfect water temperature. Leak free】its one-piece construction for no leaking. Lifetime limited warranty: you can install with confidence, knowing Peerless kitchen faucets are backed by the Peerless Lifetime Limited Warranty.

More information about The Chi's #ad


Similar products:


JZBRAIN Commercial Faucet Installation Kit,1/2 NPSM Short Elbow NPT Male & MaleFemale Adjustable Backsplash Mount Set for Stainless Steel Commercial Kitchen Prep & Utility Sink

#ad
JZBRAIN #ad - Lifetime limited warranty: you can install with confidence, knowing Peerless kitchen faucets are backed by the Peerless Lifetime Limited Warranty. Easy to instal】connect the longer end to the back of wall mount faucet, the shorter end to water line, aganist washes at the back of Stainless Steel sink by lock nuts to secure faucet.

Two short elbows with 1/2" NPT male inlet and 1/2" NPT female outlet. Material: Brass. Sold in pair】comes with 90 degree angled elbow joint x 2, lock nut x 2, plastic washer x 2 and rubber washer x 2. For other brand faucet, it is better to use water tapes. General compatibility: inlet size with 1/2 NPT is the standard thread for water inlet connection.

JZBRAIN Commercial Faucet Installation Kit,1/2 NPSM Short Elbow NPT Male & MaleFemale Adjustable Backsplash Mount Set for Stainless Steel Commercial Kitchen Prep & Utility Sink #ad - Tip: it is advised to use water tapes to prevent leaking. Space saving: this angle part is designed for place saving, you can just reserve 1. 5 inch space behind the sink for the assembly. Brass intallation kits with duability ensurance: Lead free brass material, heavy duty design. B-0230 series Faucet Installation Kit.

2, inlet side:it is advised to use water tapes to prevent leaking. Purchase supply lines separately: Standard supply lines are required for installation and must be purchased separately to complete the unit.

More information about JZBRAIN #ad


Similar products:


MSTJRY Commercial Sink Faucet with Pre-Rinse Sprayer Brass Constructed Wall Mount Kitchen Faucets 8" Center 20" Height with Stainless Steel Spring Pull Down Sprayer and 8 Inch Add-On Swing Spout

#ad
MSTJRY #ad - 5 years quality replacement, best choice for your kitchen. Double-layer anti-leaking construction: our faucet makes double-layer with two O-Rings better than other single layer construction, this can provide enhanced leak-tightness of the kitchen faucet while increasing the service life one time. 2 handle commercial sink faucet: the pre rinse sprayer valve and add-on swing spout.

Two short elbows with 1/2" NPT male inlet and 1/2" NPT female outlet. Easy installation: designed to fit 2-hole, wall-mounted configurations with 7-9 inches between hole centers. We add a stainless steel sheath on the interface between the tubing and faucet to increase the service life of the tubing. Installation kit for backslash mount】this elbow adapter with 1/2 ips male ends is designed to install a wall mount commerical faucet on the backsplash of Stainless Steel Commercial Kitchen Prep & Utility Sink.

MSTJRY Commercial Sink Faucet with Pre-Rinse Sprayer Brass Constructed Wall Mount Kitchen Faucets 8" Center 20" Height with Stainless Steel Spring Pull Down Sprayer and 8 Inch Add-On Swing Spout #ad - Material: Brass. Specification faucet height:20" spout width: 8" spout swivel: 360 degrees package included: 1* spray valve 1* bent pipe 1* ring 1* finger hook 1* riser Pipe 1* Wall Bracket 1* Lever Handle 1* Swing Nozzle 1* Add-on Faucet 1* "3" Tube 1* Spare Parts Attention: The add-on swing spout is 8" long, if you need shorter spout, get it for a significant discount - refer to our Specials and Promotions for more details.

Pre-rinse spray the pull-down sprayer features rubber nozzles that prevent hard water and limescale buildup, easy handle and maintenance. Space saving: this angle part is designed for place saving, you can just reserve 1. 5 inch space behind the sink for the assembly.

More information about MSTJRY #ad


Similar products:


Wall Mount Faucet Kitchen 6 Inch Center 3-9 Incn with Sprayer Polished Chrome Commercial Double Cross Knobs 2 Handle Mixer Pull Out Hot and Cold Water Tap 360 Degree Swivel Spray

#ad
Lili #ad - This durable wall mount kitchen faucet give your kitchen a touch of contemporary style. 1/2 ips straight therad】it is not 1/2 npt, it's 1/2 ips which is also called G1/2, fitting wall commerical faucets with G1/2 female end. It make the appearance more aesthetically, and It has high hardness and better heat resistance characteristics.

Easy to install the faucet by hand, and there is no water leakage. The flexible metal tubing can be bend back and forth over 100000 cycles. We add a stainless steel sheath on the interface between the tubing and faucet to increase the service life of the tubing. Durable construction】this wall mounted kitchen faucet constructed from solid brass, polish chrome finish, prevent to be discolored, rusty.

Wall Mount Faucet Kitchen 6 Inch Center 3-9 Incn with Sprayer Polished Chrome Commercial Double Cross Knobs 2 Handle Mixer Pull Out Hot and Cold Water Tap 360 Degree Swivel Spray #ad - Suitable for lifelong use. Features】double to control hot and cold water, an extra hose. Include all the install mounting hardware. What include】Facet body, adjustable adapter, extra sprayer hose. The surface of faucet is plated by chrome treatment. You can use the promotion code set in the faucet page. 8 inch adjustable center commercial spring faucet: 20 inch height 8 inch add-on spout for most home kitchen, fitting well with 1 or 2 compartment stainless steel kitchen prep or utility sink using.

Material: Brass.

More information about Lili #ad


Similar products:


TOSCA 255-K820-T 2-Handle Wall-Mount Pull-Down Sprayer Kitchen Faucet

#ad
Tosca 255-K820-T #ad - Space saving: this angle part is designed for place saving, you can just reserve 1. 5 inch space behind the sink for the assembly. Brass intallation kits with duability ensurance: Lead free brass material, heavy duty design. We add a stainless steel sheath on the interface between the tubing and faucet to increase the service life of the tubing.

Installation kit for backslash mount】this elbow adapter with 1/2 ips male ends is designed to install a wall mount commerical faucet on the backsplash of Stainless Steel Commercial Kitchen Prep & Utility Sink. Do not choose the other cheaper quality for your high quality faucet wasting your time to deal with the leaking in the future.

TOSCA 255-K820-T 2-Handle Wall-Mount Pull-Down Sprayer Kitchen Faucet #ad - Frequently bought together: you will get 30% off on this part if you order it together with any of JZBRAIN wall mount kitchen faucets. Jzbrain branded installation kits: outlet size with 1/2 npsm compatible with all wall mounted commercial faucets & stainless steel kitchen sinks. Tips: no need adding water tapes during install with JZBRAIN commecial faucet, because there is gasket in the faucet for sealing function.

Two 1/2" npt supply nipples with lock nuts and washers. For other brand faucet, it is better to use water tapes. General compatibility: inlet size with 1/2 NPT is the standard thread for water inlet connection. Tip: it is advised to use water tapes to prevent leaking.

More information about Tosca 255-K820-T #ad


Similar products:


Wall mount faucet Installation Kit COOLWEST Backsplash Mounting Connector Adapter Set for Commercial Kitchen Prep & Utility Sink

#ad
COOLWEST #ad - Compatible for these wall mount faucets jzbrain b072bxczvq jzbrain b07jl9hsw5 jzbrain b07kf8pdrx mstjry b07dxfrqwm mstjry b0754dlbh3 mstjry b07kf4m9b2 imlezon b073wb5mj3 imlezon b07prjmgc8 imlezon b07kbtxqfv bwe b01mt6kupq peerless b0054y3xi8 aquaterior 81fau002-12til-chr, and outlet 1/2 inch tips: 1, 81fau002-12til-chr-1, fba_81fau001-12aof-chr, 81fau003-8-chr, 81fau004-12atb-chr kingston brass ks213orb kingston brass ks213c kingston Brass KS3221AX Kingston Brass KS3225AX Moen 8126 Kingston Brass KS3225AX All other wall mount faucet with wall mount faucet body thread in G1/2, Outlet side: No adding water tapes during install with commercial faucet if there is gasket in the faucet for sealing function.

Tips: please check your faucet that need some water tape to avoid leaking. 5-year. Generally compatible】the outlet is g 1/2 also called 1/2 IPS male outlet can adjustable 1/2 inch female, the thread inlet size is 1/2 inch male. Space saving】 this angle part is designed for place saving, you can just reserve 1.

Wall mount faucet Installation Kit COOLWEST Backsplash Mounting Connector Adapter Set for Commercial Kitchen Prep & Utility Sink #ad - 5 inch space behind the sink for the assembly. Leak free】its one-piece construction for no leaking. B-0230 series Faucet Installation Kit. Lifetime limited warranty: you can install with confidence, knowing Peerless kitchen faucets are backed by the Peerless Lifetime Limited Warranty. Two short elbows with 1/2" NPT male inlet and 1/2" NPT female outlet.

More information about COOLWEST #ad


Similar products:


12 in. Deep - GRIDMANN NSF Stainless Steel 18" Single Bowl Commercial Kitchen Sink with Right Drainboard

#ad
GRIDMANN SINK-CS-GR02-CS18RD #ad - High pressure spray when the handle is pressed down; the swing spout can rotate at 360 degree, its surface is plated by chrome treatment to make its high hardness and better heat resistance characteristics, more aesthetically. Wall mounted installation faucet: wall mount with the stainless wall bracket, install it by hand and there is no water leakage, no need wait long time for plumber.

The flexible metal tubing can be bend back and forth over 100000 cycles. These inserts are non-marring to prevent damage to your floors and can also help align the sink for use with a wall-mounted faucet. Drain included: includes a premium stainless steel basket strainer and drain assembly plumbing trap is not included.

12 in. Deep - GRIDMANN NSF Stainless Steel 18" Single Bowl Commercial Kitchen Sink with Right Drainboard #ad - Very easy to install】wall mount type with 2 hole installation. Two hole distance is 15cm5. 9", ship with adjustable adapter to adjust installation hole distance between 2. 6 inch to 9 inch. Tips: please check your faucet that need some water tape to avoid leaking. This stainless steel sink has been built for high-volume use, to last a lifetime.

. Nsf certified to meet the strict standards for public health protection.

More information about GRIDMANN SINK-CS-GR02-CS18RD #ad


Similar products: